SELECT T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'E01002' SELECT OP.C_ORD_THK ,OP.C_ORD_WTH ,OP.C_ORD_THK_MIN ,OP.C_ORD_THK_MAX ,OP.C_ORD_WTH_MIN ,OP.C_ORD_WTH_MAX ,t10.RSEPON_UNIT ,t10.DETAINFO ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --原料卷卷外观判定结果 ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD1) CRK_CD1_H, --原料卷缺陷1 ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD2) CRK_CD2_H --原料卷缺陷2 ,CS.* FROM TBE02_ORD_PRC OP , C_TBK02_COIL_COMM CL ,JB_RSEPON_UNIT t10,(SELECT T2.ROLL_COIL_SEQ ,T1.COIL_NO ,T1.H_COIL_NO1 ,T1.SLAB_NO ,T1.ORD_NO ,T1.PRODNM_CD ,XB_PACKAGE.GF_CUSTOMER_FIND(T1.CUST_CD) CUST_CD -- 客户代码 ,T1.ORD_SEQ ,T1.SPEC_ABBSYM ,T1.SPEC_STL_GRD ,T1.COIL_THK ,T1.COIL_WTH ,'' L2_COIL_WTH ,'' L2_COIL_THK ,T1.DCS_THK ,T1.DCS_WTH ,T1.ACT_WGT ,T1.MISSNO_CLF_CD ,T1.SMP_DIR_PIC_YN ,T1.SMP_PICK_YN ,T1.SMP_NO ,T1.SMP_CUT_LOC ,T1.FB_YN ,T1.WGT_DEC_RST ,T1.EXTSHAPE_DEC_GRD ,T1.EXTSHAPE_QUALITY ,T1.CUR_PROG_CD ,DECODE(T1.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸轧卷') CAL_TYPE ,DECODE(T1.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(T1.CAL_TYPE,'3','Y','') RCAL_YN ,T1.RCAL_CNT ,T1.CRK_CD1 ,T1.CRK_CD2 ,T1.CRK_CD3 ,T1.CRK_CD4 ,T1.CRK_CD5 ,T1.CRK_CD1_TYPE ,T1.CRK_CD2_TYPE ,T1.CRK_CD3_TYPE ,T1.CRK_CD4_TYPE ,T1.CRK_CD5_TYPE ,T1.MILL_DTIME ,T1.FB_REASON ,T1.EXTSHAPE_DEC_ID ,T1.EXTSHAPE_DEC_DTIME ,T1.L3_ROUGH CU_CAO_DU --20151223添加粗糙度 FROM C_TBL02_COIL_COMM T1 , C_TBF03_SPEC_MILL T2 WHERE SUBSTR(T1.COIL_NO , 1,9) = SUBSTR( T2.C_COIL_NO , 1,9) AND T2.ROLL_MANA_NO = NVL(? ,T2.ROLL_MANA_NO) AND T1.MILL_DTIME BETWEEN NVL(? , T1.MILL_DTIME) AND NVL(? , T1.MILL_DTIME) AND T1.COIL_NO LIKE ?||'%' ) CS WHERE CS.ORD_NO = OP.ORD_NO(+) AND CS.ORD_SEQ = OP.ORD_SEQ(+) and cs.COIL_NO = t10.OLD_SAMPL_NO(+) AND CS.H_COIL_NO1 = CL.COIL_NO(+) ORDER BY CS.ROLL_COIL_SEQ SELECT OP.C_ORD_THK ,OP.C_ORD_WTH ,OP.C_ORD_THK_MIN ,OP.C_ORD_THK_MAX ,OP.C_ORD_WTH_MIN ,OP.C_ORD_WTH_MAX ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --原料卷卷外观判定结果 ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD1) CRK_CD1_H, --原料卷缺陷1 ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD2) CRK_CD2_H --原料卷缺陷2 ,CS.* FROM TBE02_ORD_PRC OP , C_TBK02_COIL_COMM CL ,(SELECT T2.ROLL_COIL_SEQ ,T1.COIL_NO ,T1.H_COIL_NO1 ,T1.SLAB_NO ,T1.ORD_NO ,T1.PRODNM_CD ,XB_PACKAGE.GF_CUSTOMER_FIND(T1.CUST_CD) CUST_CD -- 客户代码 ,T1.ORD_SEQ ,T1.SPEC_ABBSYM ,T1.SPEC_STL_GRD ,T1.COIL_THK ,T1.COIL_WTH ,'' L2_COIL_WTH ,'' L2_COIL_THK ,T1.DCS_THK ,T1.DCS_WTH ,T1.ACT_WGT ,T1.MISSNO_CLF_CD ,T1.SMP_DIR_PIC_YN ,T1.SMP_PICK_YN ,T1.SMP_NO ,T1.SMP_CUT_LOC ,T1.FB_YN ,T1.WGT_DEC_RST ,T1.EXTSHAPE_DEC_GRD ,T1.EXTSHAPE_QUALITY ,T1.CUR_PROG_CD ,DECODE(T1.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸洗卷') CAL_TYPE ,DECODE(T1.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(T1.CAL_TYPE,'3','Y','') RCAL_YN ,T1.RCAL_CNT ,T1.CRK_CD1 ,T1.CRK_CD2 ,T1.CRK_CD3 ,T1.CRK_CD4 ,T1.CRK_CD5 ,T1.CRK_CD1_TYPE ,T1.CRK_CD2_TYPE ,T1.CRK_CD3_TYPE ,T1.CRK_CD4_TYPE ,T1.CRK_CD5_TYPE ,T1.MILL_DTIME ,T1.FB_REASON ,T1.EXTSHAPE_DEC_ID ,T1.EXTSHAPE_DEC_DTIME ,T1.L3_ROUGH CU_CAO_DU --20151223添加粗糙度 FROM C_TBL02_COIL_COMM T1 , S_TBF03_SPEC_MILL T2 WHERE SUBSTR(T1.COIL_NO , 1,9) = T2.C_COIL_NO(+) AND T1.OLD_SAMPL_NO like ? ||'%' AND T1.MILL_DTIME BETWEEN NVL(? , T1.MILL_DTIME) AND NVL(? , T1.MILL_DTIME) AND T1.COIL_NO LIKE ?||'%' ) CS WHERE CS.ORD_NO = OP.ORD_NO(+) AND CS.ORD_SEQ = OP.ORD_SEQ(+) AND CS.H_COIL_NO1 = CL.COIL_NO(+) ORDER BY CS.ROLL_COIL_SEQ SELECT T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'B02001' select T.SM_CD SM_CD , T.SM_CFNM from TBZ00_COMMCD t where t.LG_CD = 'H02001' select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a where a.validflag = '1' AND PLINE_CODE = 'RZ1' select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a where a.validflag = '1' AND PLINE_CODE = 'RZ1' and a.defect_type_desc = ? SELECT T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'B02001' union select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a where a.validflag = '1' AND PLINE_CODE IN ('LT1','SZ1','RZ1') SELECT T.EXTSHAPE_CD , T.MIAN_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.MIAN_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.CE_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.CE_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.TOU_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.TOU_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.DAXIAO_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.DAXIAO_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.DUOSHAO_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.DUOSHAO_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.SHOUGAN_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.SHOUGAN_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.SHIJUE_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.SHIJUE_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T.EXTSHAPE_CD , T.QITA_DESC FROM TBB01_SEQ_EXTSHAPE T WHERE T.QITA_DESC IS NOT NULL ORDER BY T.EXTSHAPE_CD SELECT T2.QLTY_CD_CFNM , T1.QLTY_MIN , T1.QLTY_MAX FROM TBB02_INS_QLTY T1 , TBB01_SEQ_QLTY T2 WHERE T1.QLTY_CD = T2.QLTY_CD AND T1.SMP_NO = ? AND T1.SMP_CUT_LOC = ? select distinct t3.phy_name_s || t3.phy_unit || '[' || t3.item_name_d || decode(t3.item_name_s, '', '', ',' || t3.item_name_s) || ']' QLTY_CD_CFNM, t3.stdmin QLTY_MIN, t3.stdmax QLTY_MAX from qcm_jhy_sample_consign_d t1, qcm_jhy_sample_consign_d_item t3 where t1.specimen_no = t3.specimen_no and t1.inspection_lot = ? /*UNION ALL SELECT T2.QLTY_CD_CFNM , T1.QLTY_MIN , T1.QLTY_MAX FROM TBB02_INS_QLTY T1 , TBB01_SEQ_QLTY T2 WHERE T1.QLTY_CD = T2.QLTY_CD AND T1.SMP_NO = ? AND T1.SMP_CUT_LOC = ?*/ select distinct t3.phy_code_s QLTY_CD, t3.phy_name_s || t3.phy_unit || '[' || t3.item_name_d || decode(t3.item_name_s, '', '', ',' || t3.item_name_s) || ']' QLTY_CD_CFNM, t3.seq QLTY_SEQ, t3.stdmin QLTY_MIN, t3.stdmax QLTY_MAX, t2.val1 QLTY_VAL_WK, t2.val2 QLTY_VAL_WKX, t2.val3 QLTY_VAL_WK1, t2.val4 QLTY_VAL_WK2, '' QLTY_DEC_CD from qcm_jhy_sample_consign_d t1, qcm_jhy_insp_physics t2, qcm_jhy_sample_consign_d_item t3 where t1.specimen_no = t3.specimen_no and t1.specimen_no = t2.specimen_no and t2.seq = t3.seq and t1.inspection_lot = ? SELECT CC.COIL_NO ,CC.H_COIL_NO1 ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD -- 客户代码 ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.FB_YN ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸轧卷') CAL_TYPE ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN ,CC.RCAL_CNT ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,OP.C_ORD_THK ,OP.C_ORD_WTH ,OP.C_ORD_THK_MIN ,OP.C_ORD_THK_MAX ,OP.C_ORD_WTH_MIN ,OP.C_ORD_WTH_MAX ,CC.MILL_DTIME ,CC.L3_ROUGH CU_CAO_DU --20151223添加粗糙度 FROM TBE02_ORD_PRC OP , C_TBL02_COIL_COMM CC WHERE CC.ORD_NO = OP.ORD_NO(+) AND CC.ORD_SEQ = OP.ORD_SEQ(+) AND CC.EXTSHAPE_QUALITY IS NULL AND CC.COIL_STAT = '2' ORDER BY CC.COIL_NO UPDATE C_TBL02_COIL_COMM T SET T.SMP_PICK_YN = ? WHERE T.COIL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.MATLQLTY_DEC_GRD IS NULL UPDATE TBB02_LOT_COM SET SMP_PROG_CD = 'B' ,SMP_GET_DTIME = TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS') WHERE SMP_NO = ? AND SMP_CUT_LOC = ? AND SMP_PROG_CD = 'A' UPDATE C_TBL02_COIL_COMM T SET T.CRK_CD1 = ? ,T.CRK_CD1_TYPE = ? ,T.CRK_CD2 = ? ,T.CRK_CD2_TYPE = ? ,T.CRK_CD3 = ? ,T.CRK_CD3_TYPE = ? ,T.CRK_CD4 = ? ,T.CRK_CD4_TYPE = ? ,T.CRK_CD5 = ? ,T.CRK_CD5_TYPE = ? WHERE T.COIL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.TOT_DEC_GRD IS NULL UPDATE C_TBL02_COIL_COMM T SET T.EXTSHAPE_QUALITY = ? ,T.EXTSHAPE_DEC_DTIME = TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS') ,T.EXTSHAPE_DEC_ID = ? ,T.EXTSHAPE_DEC_GRD = '1' WHERE T.COIL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.TOT_DEC_GRD IS NULL UPDATE C_TBL02_COIL_COMM T SET T.DCS_THK = ? ,T.DCS_WTH = ? WHERE T.COIL_NO = ? AND T.COIL_STAT IN ('1' , '2') -- AND T.TOT_DEC_GRD IS NULL {call ZL_SUAN_DCS01.COIL_FAN_XIU(?,?,?,?,?)} {call WGPDGX(?,?,?,?,?)} {call RZQXLR(?,?,?,?,?,?,?,?)} {call ZL_HOST_DCS02.SMP_SPM_CHECK(?,?,?,?,?)} {call LTWDDJGG(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)} {call RZSJGX(?,?,?,?,?,?,?)} SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE ---1正常卷，2返修卷，3过渡卷 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S, --酸轧卷外观判定结果 CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S, --酸轧卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S, --酸轧卷缺陷1 CL.CRK_CD1 CRK_CD1_S, CL.CRK_CD1_TYPE CRK_CD1_TYPE_S, --酸轧卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S, --酸轧卷缺陷2 CL.CRK_CD2 CRK_CD2_S, CL.CRK_CD2_TYPE CRK_CD2_TYPE_S, --酸轧卷缺陷2类型 CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --热轧卷外观判定结果 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H --热轧卷缺陷2 (SELECT TC3.SM_CFNM FROM TBZ00_COMMCD TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H, (SELECT TC4.SM_CFNM FROM TBZ00_COMMCD TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,C_TBK02_COIL_COMM CK ,(SELECT T1.COIL_NO COIL_ID --母卷ID ,T2.* --子卷信息 FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.SLAB_NO = T2.SLAB_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'L' AND LENGTH(T1.COIL_NO) = 12 AND T2.DIVIDE_YN = 'N' AND T2.CUR_PROG_CD IS NOT NULL AND T2.MILL_DTIME BETWEEN NVL(? , T2.MILL_DTIME) AND NVL(? , T2.MILL_DTIME) AND T2.OLD_SAMPL_NO LIKE ?||'%' ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'L' AND CC.DIVIDE_YN = 'N' AND CL.H_COIL_NO1 = CK.COIL_NO(+) AND CL.COIL_NO = CC.ORI_OLD_SAMPL_NO AND CL.COIL_NO = SM.C_COIL_NO AND CC.CUR_PROG_CD IS NOT NULL --AND CC.MILL_DTIME BETWEEN NVL(? , CC.MILL_DTIME) AND NVL(? , CC.MILL_DTIME) --AND CC.OLD_SAMPL_NO LIKE ?||'%' ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,CC.PRODNM_CD ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.L2_COIL_WTH ,CC.L2_COIL_THK ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,t10.RSEPON_UNIT ,t10.DETAINFO ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI ,CC.FB_REASON ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE ---1正常卷，2返修卷，3过渡卷 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 ,CL.SLAB_NO ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S, --酸轧卷外观判定结果 CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S, --酸轧卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S, --酸轧卷缺陷1 CL.CRK_CD1 CRK_CD1_S, CL.CRK_CD1_TYPE CRK_CD1_TYPE_S, --酸轧卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S, --酸轧卷缺陷2 CL.CRK_CD2 CRK_CD2_S, CL.CRK_CD2_TYPE CRK_CD2_TYPE_S, --酸轧卷缺陷2类型 CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --热轧卷外观判定结果 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H --热轧卷缺陷2 (SELECT TC3.SM_CFNM FROM TBZ00_COMMCD TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H, (SELECT TC4.SM_CFNM FROM TBZ00_COMMCD TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,C_TBK02_COIL_COMM CK ,C_TBC02_COIL_COMM CC ,JB_RSEPON_UNIT t10 WHERE SUBSTR(CC.COIL_NO,1,12) = SM.L_COIL_ID AND CC.LINE_TP = 'L' AND CC.DIVIDE_YN = 'N' AND CL.H_COIL_NO1 = CK.COIL_NO(+) AND CL.COIL_NO = SM.C_COIL_NO and CC.OLD_SAMPL_NO = t10.OLD_SAMPL_NO(+) AND CC.CUR_PROG_CD IS NOT NULL AND CC.MILL_DTIME BETWEEN NVL(?, CC.MILL_DTIME) AND NVL(? , CC.MILL_DTIME) AND CC.OLD_SAMPL_NO LIKE ?||'%' --AND CL.COIL_NO = CC.ORI_OLD_SAMPL_NO ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD -- 客户代码 ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,(SELECT T1.COIL_NO COIL_ID ,T2.* FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.SLAB_NO = T2.SLAB_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'L' AND LENGTH(T1.COIL_NO) = 12 ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'L' AND CC.DIVIDE_YN = 'N' AND CL.COIL_NO = CC.ORI_OLD_SAMPL_NO AND CL.COIL_NO = SM.C_COIL_NO AND (CC.EXTSHAPE_QUALITY IS NULL OR (CC.SMP_DIR_PIC_YN = 'Y' AND CC.SMP_PICK_YN IS NULL )) AND CC.COIL_STAT IN ('1', '2') ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD -- 客户代码 ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CC.H_COIL_NO1 FROM L_TBF03_SPEC_MILL SM , C_TBC02_COIL_COMM CC WHERE CC.COIL_NO = SM.L_COIL_ID AND CC.LINE_TP = 'L' AND CC.DIVIDE_YN = 'N' AND CC.COIL_STAT = '2' AND CC.FAN_XIU = 'A' ORDER BY CC.OLD_SAMPL_NO UPDATE C_TBC02_COIL_COMM T SET T.CRK_CD1 = ? ,T.CRK_CD1_TYPE = ? ,T.CRK_CD2 = ? ,T.CRK_CD2_TYPE = ? ,T.CRK_CD3 = ? ,T.CRK_CD3_TYPE = ? ,T.CRK_CD4 = ? ,T.CRK_CD4_TYPE = ? ,T.CRK_CD5 = ? ,T.CRK_CD5_TYPE = ? WHERE T.OLD_SAMPL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.TOT_DEC_GRD IS NULL UPDATE C_TBC02_COIL_COMM T SET T.COIL_RT = ? ,T.EXTSHAPE_QUALITY = ? ,T.EXTSHAPE_DEC_DTIME = TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS') ,T.EXTSHAPE_DEC_ID = ? ,T.EXTSHAPE_DEC_GRD = '1' WHERE T.OLD_SAMPL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.TOT_DEC_GRD IS NULL UPDATE C_TBC02_COIL_COMM T SET T.COIL_THK = ? ,T.COIL_WTH = ? ,T.CAL_TYPE_TEMP = ? ,T.CU_CAO_DU = ? ,T.YUAN_COIL_THK = ? ,T.YUAN_COIL_WTH = ? WHERE T.OLD_SAMPL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.TOT_DEC_GRD IS NULL UPDATE C_TBC02_COIL_COMM T SET T.SMP_PICK_YN = ? WHERE T.OLD_SAMPL_NO = ? AND T.COIL_STAT IN ('1' , '2') AND T.SMP_DIR_PIC_YN = 'Y' -- AND T.MATLQLTY_DEC_GRD IS NULL {call ZL_LIANT_DCS01.COIL_FAN_XIU(?,?,?,?,?)} SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,CC.PRODNM_CD ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.L2_COIL_WTH ,CC.L2_COIL_THK ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.FB_REASON ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,t10.RSEPON_UNIT ,t10.DETAINFO ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷') CAL_TYPE ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 ,CL.SLAB_NO ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S, --酸轧卷外观判定结果 CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S, --酸轧卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S, --酸轧卷缺陷1 CL.CRK_CD1 CRK_CD1_S, CL.CRK_CD1_TYPE CRK_CD1_TYPE_S, --酸轧卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S, --酸轧卷缺陷2 CL.CRK_CD2 CRK_CD2_S, CL.CRK_CD2_TYPE CRK_CD2_TYPE_S, --酸轧卷缺陷2类型 CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --热轧卷外观判定结果 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1 (SELECT TC3.SM_CFNM FROM TBZ00_COMMCD TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H, --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H, --热轧卷缺陷2 (SELECT TC4.SM_CFNM FROM TBZ00_COMMCD TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H, CC.EXTSHAPE_DEC_GRD_L, --连退卷外观判定结果 CC.EXTSHAPE_QUALITY_L, --连退卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1 CC.CRK_CD1_L CRK_CD1_L, CC.CRK_CD1_TYPE_L, --连退卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2 CC.CRK_CD2_L CRK_CD2_L, CC.CRK_CD2_TYPE_L --连退卷缺陷2类型 FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,C_TBK02_COIL_COMM CK ,JB_RSEPON_UNIT t10 ,(SELECT T1.COIL_NO COIL_ID ,T1.ORI_OLD_SAMPL_NO SUAN_COIL_NO ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L, --外观判定结果 T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L, --外观判定等级 T1.CRK_CD1 CRK_CD1_L, --缺陷1 T1.CRK_CD1_TYPE CRK_CD1_TYPE_L, --缺陷1类型 T1.CRK_CD2 CRK_CD2_L, --缺陷2 T1.CRK_CD2_TYPE CRK_CD2_TYPE_L --缺陷2类型 ,T2.* FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.SLAB_NO = T2.SLAB_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'C' AND LENGTH(T1.COIL_NO) = 12 AND SUBSTR(T2.MILL_DTIME,1,8) BETWEEN ? AND ? AND T2.OLD_SAMPL_NO LIKE ?||'%' ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'C' AND CC.DIVIDE_YN = 'N' AND CL.H_COIL_NO1 = CK.COIL_NO(+) and CC.OLD_SAMPL_NO = t10.OLD_SAMPL_NO(+) AND CL.COIL_NO = SUBSTR(CC.OLD_SAMPL_NO , 1,12) --AND CL.COIL_NO = SM.C_COIL_NO --AND CC.MILL_DTIME BETWEEN NVL(? , CC.MILL_DTIME) AND NVL(? , CC.MILL_DTIME) --AND CC.OLD_SAMPL_NO LIKE ?||'%' ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷') CAL_TYPE ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S, --酸轧卷外观判定结果 CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S, --酸轧卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S, --酸轧卷缺陷1 CL.CRK_CD1 CRK_CD1_S, CL.CRK_CD1_TYPE CRK_CD1_TYPE_S, --酸轧卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S, --酸轧卷缺陷2 CL.CRK_CD2 CRK_CD2_S, CL.CRK_CD2_TYPE CRK_CD2_TYPE_S, --酸轧卷缺陷2类型 CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --热轧卷外观判定结果 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1 (SELECT TC3.SM_CFNM FROM TBZ00_COMMCD TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H, --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H, --热轧卷缺陷2 (SELECT TC4.SM_CFNM FROM TBZ00_COMMCD TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H, CC.EXTSHAPE_DEC_GRD_L, --连退卷外观判定结果 CC.EXTSHAPE_QUALITY_L, --连退卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1 CC.CRK_CD1_L CRK_CD1_L, CC.CRK_CD1_TYPE_L, --连退卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2 CC.CRK_CD2_L CRK_CD2_L, CC.CRK_CD2_TYPE_L --连退卷缺陷2类型 FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,C_TBK02_COIL_COMM CK ,(SELECT SUBSTR(T1.COIL_NO,1,12) COIL_ID ,T1.ORI_OLD_SAMPL_NO SUAN_COIL_NO ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L, --外观判定结果 T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L, --外观判定等级 T1.CRK_CD1 CRK_CD1_L, --缺陷1 T1.CRK_CD1_TYPE CRK_CD1_TYPE_L, --缺陷1类型 T1.CRK_CD2 CRK_CD2_L, --缺陷2 T1.CRK_CD2_TYPE CRK_CD2_TYPE_L --缺陷2类型 ,T2.* FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.OLD_SAMPL_NO = T2.ORI_OLD_SAMPL_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'C' AND LENGTH(T1.COIL_NO) >= 12 AND T2.MILL_DTIME BETWEEN NVL(? , T2.MILL_DTIME) AND NVL(? , T2.MILL_DTIME) AND T2.OLD_SAMPL_NO LIKE ?||'%' ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'C' AND CC.DIVIDE_YN = 'N' AND CL.H_COIL_NO1 = CK.COIL_NO(+) AND CL.COIL_NO = SM.C_COIL_NO --AND CL.COIL_NO = SUBSTR(CC.OLD_SAMPL_NO , 1,12) --AND CC.MILL_DTIME BETWEEN NVL(? , CC.MILL_DTIME) AND NVL(? , CC.MILL_DTIME) --AND CC.OLD_SAMPL_NO LIKE ?||'%' ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD -- 客户代码 ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷') CAL_TYPE ,CC.RCAL_CNT ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,(SELECT T1.COIL_NO COIL_ID ,T1.ORI_OLD_SAMPL_NO SUAN_COIL_NO ,T2.* FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.SLAB_NO = T2.SLAB_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'C' AND LENGTH(T1.COIL_NO) = 12 ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'C' AND CC.DIVIDE_YN = 'N' AND CL.COIL_NO = SUBSTR(CC.OLD_SAMPL_NO , 1,12) AND CL.COIL_NO = SM.C_COIL_NO AND (CC.EXTSHAPE_QUALITY IS NULL OR (CC.SMP_DIR_PIC_YN = 'Y' AND CC.SMP_PICK_YN IS NULL )) AND CC.COIL_STAT IN ('1' , '2') ORDER BY CC.OLD_SAMPL_NO SELECT CC.OLD_SAMPL_NO COIL_NO ,CC.ORD_NO ,CC.PRODNM_CD ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD ,CC.ORD_SEQ ,CC.SPEC_ABBSYM ,CC.SPEC_STL_GRD ,CC.COIL_THK ,CC.COIL_WTH ,CC.DCS_THK ,CC.DCS_WTH ,CC.L2_COIL_WTH ,CC.L2_COIL_THK ,CC.YUAN_COIL_THK ,CC.YUAN_COIL_WTH ,CC.ACT_WGT ,CC.MISSNO_CLF_CD ,CC.SMP_DIR_PIC_YN ,CC.SMP_PICK_YN ,CC.SMP_NO ,CC.SMP_CUT_LOC ,CC.WGT_DEC_RST ,CC.EXTSHAPE_DEC_GRD ,CC.EXTSHAPE_QUALITY ,CC.CUR_PROG_CD ,CC.CRK_CD1 ,CC.CRK_CD2 ,CC.CRK_CD3 ,CC.CRK_CD4 ,CC.CRK_CD5 ,CC.FB_REASON ,CC.CRK_CD1_TYPE ,CC.CRK_CD2_TYPE ,CC.CRK_CD3_TYPE ,CC.CRK_CD4_TYPE ,CC.CRK_CD5_TYPE ,t10.RSEPON_UNIT ,t10.DETAINFO ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI ,SM.ORD_THK C_ORD_THK --订单计划规格 ,SM.ORD_WTH C_ORD_WTH --订单计划规格 ,SM.THK_MIN C_ORD_THK_MIN --订单最小厚度 ,SM.THK_MAX C_ORD_THK_MAX --订单最大厚度 ,SM.WTH_MIN C_ORD_WTH_MIN --订单最小宽度 ,SM.WTH_MAX C_ORD_WTH_MAX --订单最大宽度 ,CC.MILL_DTIME ,CL.MANU_COIL_THK YUAN_COIL_THK ,CL.MANU_COIL_WTH YUAN_COIL_WTH ,SM.COIL_THK S_COIL_THK ,SM.COIL_WTH S_COIL_WTH ,CC.ELONGATION_SPM --平整机延伸率 ,CC.CU_CAO_DU --粗糙度 ,CC.CAL_TYPE_TEMP --返修温度 ,DECODE(CC.CAL_TYPE,'2','Y','') FAN_XIU ,DECODE(CC.CAL_TYPE,'3','Y','') RCAL_YN --是否过渡 ,CC.RCAL_CNT ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷') CAL_TYPE ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡' ELSE NULL END RCAL_CNT_1 ,CC.EXTSHAPE_DEC_ID ,CC.EXTSHAPE_DEC_DTIME ,CC.COIL_RT ,CC.FB_YN ,CL.H_COIL_NO1 ,CL.SLAB_NO ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S, --酸轧卷外观判定结果 CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S, --酸轧卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S, --酸轧卷缺陷1 CL.CRK_CD1 CRK_CD1_S, CL.CRK_CD1_TYPE CRK_CD1_TYPE_S, --酸轧卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S, --酸轧卷缺陷2 CL.CRK_CD2 CRK_CD2_S, CL.CRK_CD2_TYPE CRK_CD2_TYPE_S, --酸轧卷缺陷2类型 CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H, --热轧卷外观判定结果 --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1 (SELECT TC3.SM_CFNM FROM TBZ00_COMMCD TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H, --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H, --热轧卷缺陷2 (SELECT TC4.SM_CFNM FROM TBZ00_COMMCD TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H, CC.EXTSHAPE_DEC_GRD_L, --连退卷外观判定结果 CC.EXTSHAPE_QUALITY_L, --连退卷外观判定等级 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1 CC.CRK_CD1_L CRK_CD1_L, CC.CRK_CD1_TYPE_L, --连退卷缺陷1类型 --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2 CC.CRK_CD2_L CRK_CD2_L, CC.CRK_CD2_TYPE_L --连退卷缺陷2类型 FROM L_TBF03_SPEC_MILL SM ,C_TBL02_COIL_COMM CL ,C_TBK02_COIL_COMM CK ,JB_RSEPON_UNIT t10 ,(SELECT T1.COIL_NO COIL_ID ,T1.ORI_OLD_SAMPL_NO SUAN_COIL_NO ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L, --外观判定结果 T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L, --外观判定等级 T1.CRK_CD1 CRK_CD1_L, --缺陷1 T1.CRK_CD1_TYPE CRK_CD1_TYPE_L, --缺陷1类型 T1.CRK_CD2 CRK_CD2_L, --缺陷2 T1.CRK_CD2_TYPE CRK_CD2_TYPE_L --缺陷2类型 ,T2.* FROM C_TBC02_COIL_COMM T1 ,C_TBC02_COIL_COMM T2 WHERE T1.SLAB_NO = T2.SLAB_NO AND T1.LINE_TP = 'L' AND T2.LINE_TP = 'C' AND LENGTH(T1.COIL_NO) = 12 --AND T2.MILL_DTIME BETWEEN NVL(? , T2.MILL_DTIME) AND NVL(? , T2.MILL_DTIME) AND T2.OLD_SAMPL_NO LIKE ?||'%' ) CC WHERE CC.COIL_ID = SM.L_COIL_ID AND CC.LINE_TP = 'C' AND CC.DIVIDE_YN = 'N' AND CL.H_COIL_NO1 = CK.COIL_NO(+) --AND CL.COIL_NO = SUBSTR(CC.OLD_SAMPL_NO , 1,12) and CC.OLD_SAMPL_NO = t10.OLD_SAMPL_NO(+) AND CL.COIL_NO = SM.C_COIL_NO --AND CC.MILL_DTIME BETWEEN NVL(? , CC.MILL_DTIME) AND NVL(? , CC.MILL_DTIME) --AND CC.OLD_SAMPL_NO LIKE ?||'%' ORDER BY CC.OLD_SAMPL_NO {call ZL_LIANT_DCS01.SAVE_COIL_SMPNO(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}