XinYu_LZMES/WebRoot/WEB-INF/query/B03/UIB030110-query.xml

<?xml version="1.0" encoding='UTF-8'?>

<queryMap desc="钢卷取样及外观判定">

<query id="UIB030110_01.INIT_SELECT">
	SELECT  T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'E01002' 
</query>

<query id="UIB030110_01.SELECT"  desc="查询满足条件的钢卷信息">
	     SELECT    
          OP.C_ORD_THK
         ,OP.C_ORD_WTH
         ,OP.C_ORD_THK_MIN
         ,OP.C_ORD_THK_MAX
         ,OP.C_ORD_WTH_MIN
         ,OP.C_ORD_WTH_MAX
         ,t10.RSEPON_UNIT
         ,t10.DETAINFO
         ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,    --原料卷卷外观判定结果
	     ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD1) CRK_CD1_H, --原料卷缺陷1  
	     ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD2) CRK_CD2_H --原料卷缺陷2
         ,CS.*
          FROM   TBE02_ORD_PRC  OP , C_TBK02_COIL_COMM CL ,JB_RSEPON_UNIT t10,(SELECT    
                                      T2.ROLL_COIL_SEQ
                                     ,T1.COIL_NO
                                     ,T1.H_COIL_NO1  
                                     ,T1.SLAB_NO
                                     ,T1.ORD_NO
                                     ,T1.PRODNM_CD
                                     ,XB_PACKAGE.GF_CUSTOMER_FIND(T1.CUST_CD) CUST_CD                   -- 客户代码
                                     ,T1.ORD_SEQ 
                                     ,T1.SPEC_ABBSYM
                                     ,T1.SPEC_STL_GRD
                                     ,T1.COIL_THK
                                     ,T1.COIL_WTH
                                     ,'' L2_COIL_WTH
       								 ,'' L2_COIL_THK
                                     ,T1.DCS_THK
                                     ,T1.DCS_WTH 
                                     ,T1.ACT_WGT
                                     ,T1.MISSNO_CLF_CD
                                     ,T1.SMP_DIR_PIC_YN 
                                     ,T1.SMP_PICK_YN 
                                     ,T1.SMP_NO 
                                     ,T1.SMP_CUT_LOC 
                                     ,T1.FB_YN
                                     ,T1.WGT_DEC_RST
      								 ,T1.EXTSHAPE_DEC_GRD
                                     ,T1.EXTSHAPE_QUALITY
                                     ,T1.CUR_PROG_CD
                                     ,DECODE(T1.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸轧卷')  CAL_TYPE
                                     ,DECODE(T1.CAL_TYPE,'2','Y','')  FAN_XIU	
                                     ,DECODE(T1.CAL_TYPE,'3','Y','')  RCAL_YN
                                     ,T1.RCAL_CNT
                                     ,T1.CRK_CD1
                                     ,T1.CRK_CD2
                                     ,T1.CRK_CD3
                                     ,T1.CRK_CD4
                                     ,T1.CRK_CD5
                                     ,T1.CRK_CD1_TYPE
                                     ,T1.CRK_CD2_TYPE
                                     ,T1.CRK_CD3_TYPE
                                     ,T1.CRK_CD4_TYPE
                                     ,T1.CRK_CD5_TYPE
                                     ,T1.MILL_DTIME
                                     ,T1.FB_REASON
                                     ,T1.EXTSHAPE_DEC_ID
                                     ,T1.EXTSHAPE_DEC_DTIME
                                     ,T1.L3_ROUGH	CU_CAO_DU      --20151223添加粗糙度
                                      FROM      C_TBL02_COIL_COMM    T1 ,  C_TBF03_SPEC_MILL T2
                                      WHERE     SUBSTR(T1.COIL_NO , 1,9)    =       SUBSTR( T2.C_COIL_NO , 1,9)
                                      AND       T2.ROLL_MANA_NO             =       NVL(?  ,T2.ROLL_MANA_NO)
                                      AND       T1.MILL_DTIME    BETWEEN     NVL(? , T1.MILL_DTIME)   AND  NVL(? , T1.MILL_DTIME)
                                      AND       T1.COIL_NO        LIKE    ?||'%'
                                      )     CS
       WHERE           CS.ORD_NO     =     OP.ORD_NO(+)                                                                       
       AND             CS.ORD_SEQ    =     OP.ORD_SEQ(+)
       and 			cs.COIL_NO = t10.OLD_SAMPL_NO(+)
        AND CS.H_COIL_NO1 = CL.COIL_NO(+)
       ORDER BY        CS.ROLL_COIL_SEQ
</query>
<query id="UIB030110_11.SELECT"  desc="查询满足条件的钢卷信息">
	     SELECT    
          OP.C_ORD_THK
         ,OP.C_ORD_WTH
         ,OP.C_ORD_THK_MIN
         ,OP.C_ORD_THK_MAX
         ,OP.C_ORD_WTH_MIN
         ,OP.C_ORD_WTH_MAX
         ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,    --原料卷卷外观判定结果
	     ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD1) CRK_CD1_H, --原料卷缺陷1  
	     ZL_NORM_COMM.FZ00_COMM('H02001', CL.CRK_CD2) CRK_CD2_H --原料卷缺陷2
         ,CS.*
          FROM   TBE02_ORD_PRC  OP , C_TBK02_COIL_COMM CL ,(SELECT    
                                      T2.ROLL_COIL_SEQ
                                     ,T1.COIL_NO
                                     ,T1.H_COIL_NO1  
                                     ,T1.SLAB_NO
                                     ,T1.ORD_NO
                                     ,T1.PRODNM_CD
                                     ,XB_PACKAGE.GF_CUSTOMER_FIND(T1.CUST_CD) CUST_CD                   -- 客户代码
                                     ,T1.ORD_SEQ 
                                     ,T1.SPEC_ABBSYM
                                     ,T1.SPEC_STL_GRD
                                     ,T1.COIL_THK
                                     ,T1.COIL_WTH
                                     ,'' L2_COIL_WTH
       								 ,'' L2_COIL_THK
                                     ,T1.DCS_THK
                                     ,T1.DCS_WTH 
                                     ,T1.ACT_WGT
                                     ,T1.MISSNO_CLF_CD
                                     ,T1.SMP_DIR_PIC_YN 
                                     ,T1.SMP_PICK_YN 
                                     ,T1.SMP_NO 
                                     ,T1.SMP_CUT_LOC 
                                     ,T1.FB_YN
                                     ,T1.WGT_DEC_RST
      								 ,T1.EXTSHAPE_DEC_GRD
                                     ,T1.EXTSHAPE_QUALITY
                                     ,T1.CUR_PROG_CD
                                     ,DECODE(T1.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸洗卷')  CAL_TYPE
                                     ,DECODE(T1.CAL_TYPE,'2','Y','')  FAN_XIU	
                                     ,DECODE(T1.CAL_TYPE,'3','Y','')  RCAL_YN
                                     ,T1.RCAL_CNT
                                     ,T1.CRK_CD1
                                     ,T1.CRK_CD2
                                     ,T1.CRK_CD3
                                     ,T1.CRK_CD4
                                     ,T1.CRK_CD5
                                     ,T1.CRK_CD1_TYPE
                                     ,T1.CRK_CD2_TYPE
                                     ,T1.CRK_CD3_TYPE
                                     ,T1.CRK_CD4_TYPE
                                     ,T1.CRK_CD5_TYPE
                                     ,T1.MILL_DTIME
                                     ,T1.FB_REASON
                                     ,T1.EXTSHAPE_DEC_ID
                                     ,T1.EXTSHAPE_DEC_DTIME
                                     ,T1.L3_ROUGH	CU_CAO_DU      --20151223添加粗糙度
                                      FROM      C_TBL02_COIL_COMM    T1 ,  S_TBF03_SPEC_MILL T2
                                      WHERE     SUBSTR(T1.COIL_NO , 1,9)    =     T2.C_COIL_NO(+)
                        			  AND 	    T1.OLD_SAMPL_NO  like ? ||'%'
                                      AND       T1.MILL_DTIME    BETWEEN     NVL(? , T1.MILL_DTIME)   AND  NVL(? , T1.MILL_DTIME)
                                      AND       T1.COIL_NO        LIKE    ?||'%'
                                      )     CS
       WHERE           CS.ORD_NO     =     OP.ORD_NO(+)                                                                       
       AND             CS.ORD_SEQ    =     OP.ORD_SEQ(+)
        AND CS.H_COIL_NO1 = CL.COIL_NO(+)
       ORDER BY        CS.ROLL_COIL_SEQ
</query>
<query id="UIB030110_02.SELECT" desc="缺陷代码和进程代码">
	SELECT  T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'B02001' 
</query>

<query id="UIB030110_021.SELECT" desc="热轧缺陷代码和进程代码">
	select T.SM_CD SM_CD , T.SM_CFNM from TBZ00_COMMCD t where t.LG_CD = 'H02001'
</query>
<query id="UIB030110_021N.SELECT" desc="新系统热轧缺陷代码和进程代码">
	select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a where a.validflag = '1' AND PLINE_CODE = 'RZ1'
</query>
<query id="UIB030110_021N1.SELECT" desc="新系统热轧缺陷代码和进程代码">
	select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a 
	where a.validflag = '1' AND PLINE_CODE = 'RZ1' and a.defect_type_desc = ?
</query>


<query id="UIB030110_022.SELECT" desc="缺陷代码和进程代码">
  SELECT  T.SM_CD SM_CD , T.SM_CFNM FROM TBZ00_COMMCD T WHERE T.LG_CD = 'B02001' 
  union    
  select DEFECT_CODE SM_CD,DEFECT_DESC SM_CFNM from QCM_BASE_DEFECT a where a.validflag = '1' AND PLINE_CODE IN ('LT1','SZ1','RZ1') 
</query>


<query id="UIB030110_02_01.SELECT">
SELECT  T.EXTSHAPE_CD , T.MIAN_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.MIAN_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_02.SELECT">
SELECT  T.EXTSHAPE_CD , T.CE_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.CE_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_03.SELECT">
SELECT  T.EXTSHAPE_CD , T.TOU_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.TOU_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_04.SELECT">
SELECT  T.EXTSHAPE_CD , T.DAXIAO_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.DAXIAO_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_05.SELECT">
SELECT  T.EXTSHAPE_CD , T.DUOSHAO_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.DUOSHAO_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_06.SELECT">
SELECT  T.EXTSHAPE_CD , T.SHOUGAN_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.SHOUGAN_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_07.SELECT">
SELECT  T.EXTSHAPE_CD , T.SHIJUE_DESC  FROM TBB01_SEQ_EXTSHAPE T WHERE T.SHIJUE_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>

<query id="UIB030110_02_08.SELECT">
SELECT  T.EXTSHAPE_CD , T.QITA_DESC   FROM TBB01_SEQ_EXTSHAPE T WHERE T.QITA_DESC IS NOT NULL  ORDER BY  T.EXTSHAPE_CD 
</query>


<query id="UIB030110_03.SELECT" desc="试样信息">
    SELECT      T2.QLTY_CD_CFNM , T1.QLTY_MIN , T1.QLTY_MAX
	FROM        TBB02_INS_QLTY  T1   , TBB01_SEQ_QLTY T2 
	WHERE       T1.QLTY_CD      =    T2.QLTY_CD
	AND         T1.SMP_NO       =    ? 
	AND         T1.SMP_CUT_LOC  =    ?

</query>

<query id="UIB030110_033.SELECT" desc="连退新试样信息">
select distinct t3.phy_name_s || t3.phy_unit || '[' || t3.item_name_d ||
       decode(t3.item_name_s, '', '', ',' || t3.item_name_s) || ']' QLTY_CD_CFNM,
       t3.stdmin QLTY_MIN,
       t3.stdmax QLTY_MAX
  from qcm_jhy_sample_consign_d      t1,       
       qcm_jhy_sample_consign_d_item t3
 where t1.specimen_no = t3.specimen_no   
   and t1.inspection_lot = ?
   /*UNION ALL
    SELECT      T2.QLTY_CD_CFNM , T1.QLTY_MIN , T1.QLTY_MAX
	FROM        TBB02_INS_QLTY  T1   , TBB01_SEQ_QLTY T2 
	WHERE       T1.QLTY_CD      =    T2.QLTY_CD
	AND         T1.SMP_NO       =    ? 
	AND         T1.SMP_CUT_LOC  =    ?*/
</query>

<query id="UIB030110_036.SELECT" desc="卷板冷轧新试样信息">
select distinct t3.phy_code_s QLTY_CD,
       t3.phy_name_s || t3.phy_unit || '[' || t3.item_name_d ||
       decode(t3.item_name_s, '', '', ',' || t3.item_name_s) || ']' QLTY_CD_CFNM,
       t3.seq QLTY_SEQ,
       t3.stdmin QLTY_MIN,
       t3.stdmax QLTY_MAX,
       t2.val1 QLTY_VAL_WK,
       t2.val2 QLTY_VAL_WKX,
       t2.val3 QLTY_VAL_WK1,
       t2.val4 QLTY_VAL_WK2,
       '' QLTY_DEC_CD
  from qcm_jhy_sample_consign_d      t1,
       qcm_jhy_insp_physics          t2,       
       qcm_jhy_sample_consign_d_item t3
 where t1.specimen_no = t3.specimen_no
       and t1.specimen_no = t2.specimen_no
       and t2.seq = t3.seq    
       and t1.inspection_lot = ?

</query>

<query id="UIB030110_036N.SELECT" desc="卷板冷轧综判待判界面试样信息">
<![CDATA[
select distinct t1.smp_type_name,
				        t3.QLTY_CD,
                t3.QLTY_CD_CFNM,
                --t3.seq QLTY_SEQ,
                t3.QLTY_MIN,
                t3.QLTY_MAX,
                t2.val1 QLTY_VAL_WK,
                t2.val2 QLTY_VAL_WKX,
                t2.val3 QLTY_VAL_WK1,
                t2.val4 QLTY_VAL_WK2,
                '' QLTY_DEC_CD
  from qcm_jhy_sample_consign_d      t1,
       --qcm_jhy_insp_physics          t2,
       qcm_judge_physical_result       t2,
       (select distinct t3.phy_code_s QLTY_CD,
       t3.specimen_no,
       t3.phy_name_s || t3.phy_unit || '[' || t3.item_name_d ||
       decode(t3.item_name_s, '', '', ',' || t3.item_name_s) || ']' QLTY_CD_CFNM,
       --t3.seq QLTY_SEQ,
       t3.stdmin QLTY_MIN,
       t3.stdmax QLTY_MAX
  from qcm_jhy_sample_consign_d_item t3) t3,
       qcm_jhy_sample_r_ord          t4
 where t1.specimen_no = t3.specimen_no
   and t1.inspection_lot = t2.inspection_lot
   and t1.specimen_no = t2.specimen_no
   and t2.phy_code_s = t3.QLTY_CD
   and T2.PHY_ID = T4.PHY_ID
   and t4.inspection_lot = ?
   	  ]]>
</query>

<query id="UIB030110_OTHERS.SELECT" desc="查询冷轧的外观重量等信息">
<![CDATA[	
	 SELECT    '厚度'                  T_NAME
	           ,CASE WHEN T.DEL_TOL_THK_MIN  < 1  THEN '0'||TO_CHAR(T.DEL_TOL_THK_MIN , 'FM9999.9999') ELSE TO_CHAR(T.DEL_TOL_THK_MIN , 'FM9999.9999') END  T_MIN
	           ,CASE WHEN T.DEL_TOL_THK_MAX  < 1  THEN '0'||TO_CHAR(T.DEL_TOL_THK_MAX , 'FM9999.9999') ELSE TO_CHAR(T.DEL_TOL_THK_MAX , 'FM9999.9999') END  T_MAX
	           ,?                     T_VALUE    --厚度值
	           ,'' RMK
	  FROM      TBB01_ORD_DEL       T 
	  WHERE     T.ORD_NO            =   ? 
	  AND       T.ORD_SEQ           =   ? 
	  AND       T.DSN_KIND          =   PKG_QUALITY_COMM.FIB010203(? , ?)
	  UNION 
	  SELECT   '宽度'                  T_NAME
		        ,TO_CHAR(T.DEL_TOL_WTH_MIN) 
		        ,TO_CHAR(T.DEL_TOL_WTH_MAX) 
		        ,?     COIL_WTH                  --宽度值
		        ,''
	  FROM       TBB01_ORD_DEL       T 
	  WHERE      T.ORD_NO            =    ? 
	  AND        T.ORD_SEQ           =    ? 
	  AND        T.DSN_KIND          =    PKG_QUALITY_COMM.FIB010203(? , ?)
	  UNION 
	  SELECT   '内径'                  T_NAME
		        ,TO_CHAR(T.C_ORD_INDIA)
		        ,'' 
		        ,?                   
		        ,''      
	  FROM       TBA01_ORD_LINE       T 
	  WHERE      T.ORD_NO            =    ?
	  AND        T.ORD_SEQ           =    ?
	  UNION
      SELECT     '重量'               T_NAME
                ,TO_CHAR(OH.C_ORD_WGT_MIN) 
                ,TO_CHAR(OH.C_ORD_WGT_MAX)
                ,?       
                ,''             
      FROM       TBF02_SPEC_MILL      OH
      WHERE      OH.ORD_NO           =    ?
      AND        OH.ORD_SEQ          =    ?
      UNION
      SELECT    '外观'                  T_NAME
		        ,T.C_EXTSHAPE_REQ 
		        ,'' 
		        ,?     
		        ,?                     
	  FROM       TBB01_ORD_DEL       T 
	  WHERE      T.ORD_NO            =    ? 
	  AND        T.ORD_SEQ           =    ? 
	  AND        T.DSN_KIND          =    '4'
	  UNION
      SELECT    '包装'                  T_NAME
		        ,PKG_QUALITY_COMM.FZ00_COMM('A01010' ,T.PAKMTH_TP) --订单包装方法 
		        ,'' 
		        ,?    
		        ,''                     
	  FROM       TBA01_ORD_LINE       T 
	  WHERE      T.ORD_NO            =    ?
	  AND        T.ORD_SEQ           =    ?
	  UNION
      SELECT    '切边'                  T_NAME
		        ,nvl(t.EDGE_PROC_YN,'N') --订单切边要求 
		        ,'' 
		        ,?    
		        ,''                    
	  FROM       TBB01_ORD_HEAD       T 
	  WHERE      T.ORD_NO            =    ?
	  AND        T.ORD_SEQ           =    ?
	  ]]>
</query>

<query id="UIB030110_04.SELECT" desc="获取外观质未判定的钢卷">
	     SELECT    
	     CC.COIL_NO
	    ,CC.H_COIL_NO1   
	    ,CC.ORD_NO
	   	,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD                   -- 客户代码
	    ,CC.ORD_SEQ 
	    ,CC.SPEC_ABBSYM
	    ,CC.SPEC_STL_GRD
	    ,CC.COIL_THK
	    ,CC.COIL_WTH
	    ,CC.DCS_THK
	    ,CC.DCS_WTH 
	    ,CC.ACT_WGT
	    ,CC.MISSNO_CLF_CD
	    ,CC.SMP_DIR_PIC_YN 
	    ,CC.SMP_PICK_YN 
	    ,CC.SMP_NO 
	    ,CC.SMP_CUT_LOC
	    ,CC.FB_YN 
	    ,CC.WGT_DEC_RST
        ,CC.EXTSHAPE_DEC_GRD
	    ,CC.EXTSHAPE_QUALITY
	    ,CC.CUR_PROG_CD
	    ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常酸轧卷')  CAL_TYPE
	    ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
        ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN
        ,CC.RCAL_CNT
	    ,CC.CRK_CD1
	    ,CC.CRK_CD2
	    ,CC.CRK_CD3
	    ,CC.CRK_CD4
	    ,CC.CRK_CD5
	    ,CC.CRK_CD1_TYPE
	    ,CC.CRK_CD2_TYPE
	    ,CC.CRK_CD3_TYPE
	    ,CC.CRK_CD4_TYPE
	    ,CC.CRK_CD5_TYPE
	    ,OP.C_ORD_THK
	    ,OP.C_ORD_WTH
	    ,OP.C_ORD_THK_MIN
	    ,OP.C_ORD_THK_MAX
	    ,OP.C_ORD_WTH_MIN
	    ,OP.C_ORD_WTH_MAX
	    ,CC.MILL_DTIME
	    ,CC.L3_ROUGH	CU_CAO_DU      --20151223添加粗糙度
	     FROM   TBE02_ORD_PRC  OP , C_TBL02_COIL_COMM CC
	     WHERE           CC.ORD_NO         =     OP.ORD_NO(+)                                                                       
	     AND             CC.ORD_SEQ        =     OP.ORD_SEQ(+)
	     AND             CC.EXTSHAPE_QUALITY IS NULL
	     AND             CC.COIL_STAT      =     '2'
	     ORDER BY        CC.COIL_NO
</query>

<query id="UIB030110_SMP_01.UPDATE" desc= "更新钢卷取样">
	UPDATE     C_TBL02_COIL_COMM      T
	SET        T.SMP_PICK_YN          =     ?
	WHERE      T.COIL_NO              =     ?
	AND	       T.COIL_STAT			  IN	('1' , '2')		 
	AND        T.MATLQLTY_DEC_GRD  IS  NULL
</query>

<query id="UIB030110_SMP_02.UPDATE" desc="取样后，改变试样状态">
	UPDATE    TBB02_LOT_COM
	SET       SMP_PROG_CD      =   'B'
	         ,SMP_GET_DTIME    =   TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS')
	WHERE     SMP_NO           =   ?
	AND       SMP_CUT_LOC      =   ?
	AND       SMP_PROG_CD      =   'A'
</query>

<query id="UIB030110_03.UPDATE" desc= "钢卷缺陷录入">
	UPDATE     C_TBL02_COIL_COMM        T
	SET        T.CRK_CD1          =     ?
			  ,T.CRK_CD1_TYPE     =     ?
	          ,T.CRK_CD2    	  =     ?
	          ,T.CRK_CD2_TYPE  	  =     ?
	          ,T.CRK_CD3		  =		?
	          ,T.CRK_CD3_TYPE  	  =     ?
	          ,T.CRK_CD4	  	  =		?
	          ,T.CRK_CD4_TYPE  	  =     ?
	          ,T.CRK_CD5		  =		?
	          ,T.CRK_CD5_TYPE 	  =     ?
	WHERE      T.COIL_NO          =     ?
	AND	       T.COIL_STAT		  IN		('1' , '2')		
	AND        T.TOT_DEC_GRD     IS    NULL 
</query>

<query id="UIB030110_04.UPDATE" desc="外观等级录入">
	UPDATE     C_TBL02_COIL_COMM      T
	SET        T.EXTSHAPE_QUALITY     =     ?
			  ,T.EXTSHAPE_DEC_DTIME   =     TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS')	
			  ,T.EXTSHAPE_DEC_ID      =     ?	
			  ,T.EXTSHAPE_DEC_GRD     =     '1'
	WHERE      T.COIL_NO              =     ?
	AND	       T.COIL_STAT			  IN	('1' , '2')	
	AND        T.TOT_DEC_GRD     IS    NULL 
</query>

<query id="UIB030110_05.UPDATE" desc="判定厚度及判定宽度录入">
	UPDATE    C_TBL02_COIL_COMM		T
	SET	      T.DCS_THK				=		?
			 ,T.DCS_WTH				=		?
	WHERE	  T.COIL_NO				=		?
	AND	      T.COIL_STAT			IN		('1' , '2')		 
--	AND       T.TOT_DEC_GRD     IS    NULL 
</query>


<query id="UIB030110_01_SUAN.CALL" desc="酸轧取消返修，取消过度，关闭，取消关闭处理">
	{call ZL_SUAN_DCS01.COIL_FAN_XIU(?,?,?,?,?)}
</query>

<query id="UIB030110_WAIGUAN.CALL" desc="更新外观操作判定人及时间">
	{call WGPDGX(?,?,?,?,?)}
</query>

<query id="UIB030110_RZQXLR.CALL" desc="更新外观操作判定人及时间">
	{call RZQXLR(?,?,?,?,?,?,?,?)}
</query>

<query id="SPM_APPOINT.CALL" desc="平整指定操作">
	{call ZL_HOST_DCS02.SMP_SPM_CHECK(?,?,?,?,?)}
</query>

<query id="UIB030110_LTWG.CALL" desc="更新连退外观等级">
	{call LTWDDJGG(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
</query>

<query id="UIB030110_RZSJXG.CALL" desc="更新热轧的人工判定值">
	{call RZSJGX(?,?,?,?,?,?,?)}
</query>
<!--****************************************连退***********************************************-->

<query id="UIB030110_01_LIAN.SELECT" desc="连退查询">
      SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD 
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.WGT_DEC_RST
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE							  ---1正常卷，2返修卷，3过渡卷
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT                       
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
      ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S,  --酸轧卷外观判定结果
       CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S,  --酸轧卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S,  --酸轧卷缺陷1 
       CL.CRK_CD1 CRK_CD1_S,  
       CL.CRK_CD1_TYPE CRK_CD1_TYPE_S,          --酸轧卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S,  --酸轧卷缺陷2
       CL.CRK_CD2 CRK_CD2_S,
       CL.CRK_CD2_TYPE CRK_CD2_TYPE_S,           --酸轧卷缺陷2类型
       CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,    --热轧卷外观判定结果
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1  
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H  --热轧卷缺陷2
       (SELECT TC3.SM_CFNM  FROM TBZ00_COMMCD  TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H,
       (SELECT TC4.SM_CFNM  FROM TBZ00_COMMCD  TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H
       FROM         L_TBF03_SPEC_MILL     SM
       			   ,C_TBL02_COIL_COMM	  CL 
       			   ,C_TBK02_COIL_COMM     CK
				   ,(SELECT       T1.COIL_NO         COIL_ID        --母卷ID
			                     ,T2.*                              --子卷信息
			         FROM         C_TBC02_COIL_COMM                  T1
			                     ,C_TBC02_COIL_COMM                  T2
			         WHERE        T1.SLAB_NO                         =      T2.SLAB_NO   
			         AND          T1.LINE_TP                         =      'L'
			         AND          T2.LINE_TP                         =      'L'       
			         AND          LENGTH(T1.COIL_NO)                 =      12
			         AND          T2.DIVIDE_YN                       =      'N' 
			         AND		  T2.CUR_PROG_CD    IS     NOT NULL 
			         AND          T2.MILL_DTIME     BETWEEN     NVL(? , T2.MILL_DTIME)   AND  NVL(? , T2.MILL_DTIME)
       				 AND          T2.OLD_SAMPL_NO   LIKE   ?||'%'     
	                 )   CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'L'
       AND             CC.DIVIDE_YN                =     'N'  
       AND 			   CL.H_COIL_NO1			   =     CK.COIL_NO(+)
       AND             CL.COIL_NO        	       =     CC.ORI_OLD_SAMPL_NO
       AND             CL.COIL_NO                  =     SM.C_COIL_NO
       AND			   CC.CUR_PROG_CD    IS     NOT NULL
       --AND             CC.MILL_DTIME     BETWEEN     NVL(? , CC.MILL_DTIME)   AND  NVL(? , CC.MILL_DTIME)
       --AND             CC.OLD_SAMPL_NO   LIKE   ?||'%'
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_01_LIAN_QC.SELECT" desc="连退查询，去掉重复卷20151103添加">
      SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,CC.PRODNM_CD
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD 
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.L2_COIL_WTH
      ,CC.L2_COIL_THK
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.WGT_DEC_RST
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,t10.RSEPON_UNIT
      ,t10.DETAINFO
      ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI
      ,CC.FB_REASON
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷') CAL_TYPE							  ---1正常卷，2返修卷，3过渡卷
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT                       
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
      ,CL.SLAB_NO
      ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S,  --酸轧卷外观判定结果
       CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S,  --酸轧卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S,  --酸轧卷缺陷1 
       CL.CRK_CD1 CRK_CD1_S,  
       CL.CRK_CD1_TYPE CRK_CD1_TYPE_S,          --酸轧卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S,  --酸轧卷缺陷2
       CL.CRK_CD2 CRK_CD2_S,
       CL.CRK_CD2_TYPE CRK_CD2_TYPE_S,           --酸轧卷缺陷2类型
       CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,    --热轧卷外观判定结果
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H, --热轧卷缺陷1  
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H  --热轧卷缺陷2
       (SELECT TC3.SM_CFNM  FROM TBZ00_COMMCD  TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H,
       (SELECT TC4.SM_CFNM  FROM TBZ00_COMMCD  TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H
       FROM      L_TBF03_SPEC_MILL     SM
       			,C_TBL02_COIL_COMM	   CL 
       			,C_TBK02_COIL_COMM     CK
                ,C_TBC02_COIL_COMM     CC
                ,JB_RSEPON_UNIT	t10
       WHERE        SUBSTR(CC.COIL_NO,1,12)     =     SM.L_COIL_ID
       AND          CC.LINE_TP                  =     'L'
       AND          CC.DIVIDE_YN                =     'N'  
       AND 		    CL.H_COIL_NO1			    =     CK.COIL_NO(+)
       AND          CL.COIL_NO                  =     SM.C_COIL_NO
       and 			CC.OLD_SAMPL_NO				= t10.OLD_SAMPL_NO(+)
       AND			CC.CUR_PROG_CD              IS    NOT NULL
       AND          CC.MILL_DTIME     BETWEEN     NVL(?, CC.MILL_DTIME)   AND  NVL(? , CC.MILL_DTIME)
       AND          CC.OLD_SAMPL_NO   LIKE    ?||'%'    
       --AND          CL.COIL_NO        	       =     CC.ORI_OLD_SAMPL_NO 
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_02_LIAN.SELECT" desc="过滤未判定卷">
	   SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD                   -- 客户代码
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷')  CAL_TYPE
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
       FROM     L_TBF03_SPEC_MILL     SM  
               ,C_TBL02_COIL_COMM	  CL 
       	       ,(SELECT       T1.COIL_NO         COIL_ID 
		                     ,T2.*   
		         FROM         C_TBC02_COIL_COMM                  T1
		                     ,C_TBC02_COIL_COMM                  T2
		         WHERE        T1.SLAB_NO                         =      T2.SLAB_NO      
		         AND          T1.LINE_TP                         =      'L'
		         AND          T2.LINE_TP                         =      'L'    
		         AND          LENGTH(T1.COIL_NO)                 =      12   
                )  CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'L'
       AND             CC.DIVIDE_YN                =     'N'  
       AND             CL.COIL_NO        	       =     CC.ORI_OLD_SAMPL_NO
       AND             CL.COIL_NO                  =     SM.C_COIL_NO
       AND            (CC.EXTSHAPE_QUALITY IS NULL  OR (CC.SMP_DIR_PIC_YN = 'Y' AND CC.SMP_PICK_YN  IS NULL ))
       AND             CC.COIL_STAT      IN ('1', '2')
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_03_LIAN.SELECT"  desc="材质不合格，进行返修过滤"> 
	   SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD                   -- 客户代码
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常连退卷')  CAL_TYPE
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CC.H_COIL_NO1
       FROM   L_TBF03_SPEC_MILL  SM  , C_TBC02_COIL_COMM CC
       WHERE           CC.COIL_NO                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'L'
       AND             CC.DIVIDE_YN                =     'N'  
       AND             CC.COIL_STAT                =     '2'       
       AND             CC.FAN_XIU                  =     'A'
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_01_LIAN.UPDATE" desc= "连退钢卷缺陷录入">
	UPDATE     C_TBC02_COIL_COMM        T
	SET        T.CRK_CD1          =     ?
			  ,T.CRK_CD1_TYPE     =     ?
	          ,T.CRK_CD2    	  =     ?
	          ,T.CRK_CD2_TYPE  	  =     ?
	          ,T.CRK_CD3		  =		?
	          ,T.CRK_CD3_TYPE  	  =     ?
	          ,T.CRK_CD4	  	  =		?
	          ,T.CRK_CD4_TYPE  	  =     ?
	          ,T.CRK_CD5		  =		?
	          ,T.CRK_CD5_TYPE 	  =     ?
	WHERE      T.OLD_SAMPL_NO     =     ?
	AND	       T.COIL_STAT		  IN		('1' , '2')		
	AND        T.TOT_DEC_GRD     IS    NULL 
</query>

<query id="UIB030110_02_LIAN.UPDATE" desc="外观等级录入">
	UPDATE     C_TBC02_COIL_COMM      T
	SET        T.COIL_RT			  = 	?
			  ,T.EXTSHAPE_QUALITY     =     ?
	          ,T.EXTSHAPE_DEC_DTIME   =     TO_CHAR(SYSDATE , 'YYYYMMDDHH24MISS')	
			  ,T.EXTSHAPE_DEC_ID      =     ?	
			  ,T.EXTSHAPE_DEC_GRD     =     '1'
	WHERE      T.OLD_SAMPL_NO         =     ?
    AND	       T.COIL_STAT		  IN	('1' , '2')	
	AND        T.TOT_DEC_GRD     IS    NULL 
</query>

<query id="UIB030110_03_LIAN.UPDATE" desc="判定厚度及判定宽度录入">
	UPDATE    C_TBC02_COIL_COMM		T
	SET	      T.COIL_THK			=		?
			 ,T.COIL_WTH			=		?
			 ,T.CAL_TYPE_TEMP		=		?
			 ,T.CU_CAO_DU			=		?
			 ,T.YUAN_COIL_THK		=		?
			 ,T.YUAN_COIL_WTH		=		?
	WHERE	  T.OLD_SAMPL_NO    	=		?
	AND	      T.COIL_STAT			IN		('1' , '2')		 
	AND       T.TOT_DEC_GRD     IS    NULL 
</query>

<query id="UIB030110_04_LIAN.UPDATE" desc= "更新钢卷取样">
	UPDATE     C_TBC02_COIL_COMM      T
	SET        T.SMP_PICK_YN          =     ?
	WHERE      T.OLD_SAMPL_NO         =     ?
	AND	       T.COIL_STAT			  IN	('1' , '2')		 
	AND        T.SMP_DIR_PIC_YN       =     'Y'
--	AND        T.MATLQLTY_DEC_GRD  IS  NULL
</query>



<query id="UIB030110_01_LIAN.CALL" desc="返修处理">
	{call ZL_LIANT_DCS01.COIL_FAN_XIU(?,?,?,?,?)}
</query>



<query id="UIB030110_01_CJ.SELECT" desc="重卷查询">
	   SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,CC.PRODNM_CD
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD 
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.L2_COIL_WTH
      ,CC.L2_COIL_THK
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.WGT_DEC_RST
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.FB_REASON
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,t10.RSEPON_UNIT
       ,t10.DETAINFO
      ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷')  CAL_TYPE
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
      ,CL.SLAB_NO
      ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S,  --酸轧卷外观判定结果
       CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S,  --酸轧卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S,   --酸轧卷缺陷1  
       CL.CRK_CD1 CRK_CD1_S, 
       CL.CRK_CD1_TYPE CRK_CD1_TYPE_S,          --酸轧卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S,   --酸轧卷缺陷2
       CL.CRK_CD2 CRK_CD2_S,
       CL.CRK_CD2_TYPE CRK_CD2_TYPE_S,           --酸轧卷缺陷2类型
       CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,  --热轧卷外观判定结果
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H,  --热轧卷缺陷1  
       (SELECT TC3.SM_CFNM  FROM TBZ00_COMMCD  TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H,
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H,   --热轧卷缺陷2
       (SELECT TC4.SM_CFNM  FROM TBZ00_COMMCD  TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H,
       CC.EXTSHAPE_DEC_GRD_L,               	--连退卷外观判定结果
       CC.EXTSHAPE_QUALITY_L,               	--连退卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1  
       CC.CRK_CD1_L CRK_CD1_L,
       CC.CRK_CD1_TYPE_L,               		--连退卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2
       CC.CRK_CD2_L CRK_CD2_L,
       CC.CRK_CD2_TYPE_L                    	--连退卷缺陷2类型
       FROM     L_TBF03_SPEC_MILL          SM  
               ,C_TBL02_COIL_COMM	       CL
               ,C_TBK02_COIL_COMM          CK 
               ,JB_RSEPON_UNIT			t10
       		   ,(SELECT       T1.COIL_NO         COIL_ID 
       		                 ,T1.ORI_OLD_SAMPL_NO     SUAN_COIL_NO
       		                 ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L,   --外观判定结果
				               T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L,  --外观判定等级
				               T1.CRK_CD1 CRK_CD1_L,                    --缺陷1  
				               T1.CRK_CD1_TYPE CRK_CD1_TYPE_L,          --缺陷1类型
				               T1.CRK_CD2 CRK_CD2_L,                    --缺陷2
				              T1.CRK_CD2_TYPE CRK_CD2_TYPE_L            --缺陷2类型
		                     ,T2.*   
		         FROM         C_TBC02_COIL_COMM                  T1
		                     ,C_TBC02_COIL_COMM                  T2
		         WHERE        T1.SLAB_NO                         =      T2.SLAB_NO     
		         AND          T1.LINE_TP                         =      'L'
		         AND          T2.LINE_TP                         =      'C'
		         AND          LENGTH(T1.COIL_NO)                 =      12
		         AND          SUBSTR(T2.MILL_DTIME,1,8)     BETWEEN     ?   AND  ? 
       			 AND          T2.OLD_SAMPL_NO   LIKE   ?||'%'
				 )   CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'C'
       AND             CC.DIVIDE_YN                =     'N'  
       AND			   CL.H_COIL_NO1 			   =     CK.COIL_NO(+)
       and 			CC.OLD_SAMPL_NO				= 	t10.OLD_SAMPL_NO(+)
       AND             CL.COIL_NO        	       =     SUBSTR(CC.OLD_SAMPL_NO , 1,12)
       --AND             CL.COIL_NO                  =     SM.C_COIL_NO
       --AND             CC.MILL_DTIME     BETWEEN     NVL(? , CC.MILL_DTIME)   AND  NVL(? , CC.MILL_DTIME)
       --AND             CC.OLD_SAMPL_NO   LIKE   ?||'%'
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_01_CJ_QC.SELECT" desc="重卷查询，去掉重复的卷20151103添加">
	   SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD 
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.WGT_DEC_RST
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷')  CAL_TYPE
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
      ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S,  --酸轧卷外观判定结果
       CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S,  --酸轧卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S,   --酸轧卷缺陷1  
       CL.CRK_CD1 CRK_CD1_S, 
       CL.CRK_CD1_TYPE CRK_CD1_TYPE_S,          --酸轧卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S,   --酸轧卷缺陷2
       CL.CRK_CD2 CRK_CD2_S,
       CL.CRK_CD2_TYPE CRK_CD2_TYPE_S,           --酸轧卷缺陷2类型
       CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,  --热轧卷外观判定结果
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H,  --热轧卷缺陷1  
       (SELECT TC3.SM_CFNM  FROM TBZ00_COMMCD  TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H,
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H,   --热轧卷缺陷2
       (SELECT TC4.SM_CFNM  FROM TBZ00_COMMCD  TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H,
       CC.EXTSHAPE_DEC_GRD_L,               	--连退卷外观判定结果
       CC.EXTSHAPE_QUALITY_L,               	--连退卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1  
       CC.CRK_CD1_L CRK_CD1_L,
       CC.CRK_CD1_TYPE_L,               		--连退卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2
       CC.CRK_CD2_L CRK_CD2_L,
       CC.CRK_CD2_TYPE_L                    	--连退卷缺陷2类型
       FROM     L_TBF03_SPEC_MILL          SM  
               ,C_TBL02_COIL_COMM	       CL
               ,C_TBK02_COIL_COMM          CK 
       		   ,(SELECT       SUBSTR(T1.COIL_NO,1,12)         COIL_ID 
       		                 ,T1.ORI_OLD_SAMPL_NO     SUAN_COIL_NO
       		                 ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L,   --外观判定结果
				               T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L,  --外观判定等级
				               T1.CRK_CD1 CRK_CD1_L,                    --缺陷1  
				               T1.CRK_CD1_TYPE CRK_CD1_TYPE_L,          --缺陷1类型
				               T1.CRK_CD2 CRK_CD2_L,                    --缺陷2
				              T1.CRK_CD2_TYPE CRK_CD2_TYPE_L            --缺陷2类型
		                     ,T2.*   
		         FROM         C_TBC02_COIL_COMM                  T1
		                     ,C_TBC02_COIL_COMM                  T2
		         WHERE        T1.OLD_SAMPL_NO                    =      T2.ORI_OLD_SAMPL_NO     
		         AND          T1.LINE_TP                         =      'L'
		         AND          T2.LINE_TP                         =      'C'
		         AND          LENGTH(T1.COIL_NO)                >=      12
		         AND          T2.MILL_DTIME     BETWEEN     NVL(? , T2.MILL_DTIME)   AND  NVL(? , T2.MILL_DTIME)
       			 AND          T2.OLD_SAMPL_NO   LIKE   ?||'%'
				 )   CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'C'
       AND             CC.DIVIDE_YN                =     'N'  
       AND			   CL.H_COIL_NO1 			   =     CK.COIL_NO(+)
       AND             CL.COIL_NO                  =     SM.C_COIL_NO
       --AND             CL.COIL_NO        	       =     SUBSTR(CC.OLD_SAMPL_NO , 1,12)
       --AND             CC.MILL_DTIME     BETWEEN     NVL(? , CC.MILL_DTIME)   AND  NVL(? , CC.MILL_DTIME)
       --AND             CC.OLD_SAMPL_NO   LIKE   ?||'%'
       ORDER BY        CC.OLD_SAMPL_NO
</query>


<query id="UIB030110_02_CJ.SELECT" desc="重卷待取样">
	   SELECT
       CC.OLD_SAMPL_NO       COIL_NO
      ,CC.ORD_NO
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD                   -- 客户代码
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
	  ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷')  CAL_TYPE
      ,CC.RCAL_CNT
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
       FROM     L_TBF03_SPEC_MILL          SM  
               ,C_TBL02_COIL_COMM	       CL 
       		   ,(SELECT       T1.COIL_NO            COIL_ID 
       		                 ,T1.ORI_OLD_SAMPL_NO   SUAN_COIL_NO
		                     ,T2.*   
		         FROM         C_TBC02_COIL_COMM                  T1
		                     ,C_TBC02_COIL_COMM                  T2
		         WHERE        T1.SLAB_NO                         =      T2.SLAB_NO    
		         AND          T1.LINE_TP                         =      'L'
		         AND          T2.LINE_TP                         =      'C'
		         AND          LENGTH(T1.COIL_NO)                 =      12
				 )   CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'C'
       AND             CC.DIVIDE_YN                =     'N'  
       AND             CL.COIL_NO        	       =     SUBSTR(CC.OLD_SAMPL_NO , 1,12)
       AND             CL.COIL_NO                  =     SM.C_COIL_NO
       AND            (CC.EXTSHAPE_QUALITY IS NULL  OR (CC.SMP_DIR_PIC_YN = 'Y' AND CC.SMP_PICK_YN  IS NULL ))
       AND             CC.COIL_STAT IN ('1' , '2')
       ORDER BY        CC.OLD_SAMPL_NO
</query>

<query id="UIB030110_03_CJ.SELECT" desc="重卷查询">
	   SELECT
       CC.OLD_SAMPL_NO   COIL_NO
      ,CC.ORD_NO
      ,CC.PRODNM_CD
      ,XB_PACKAGE.GF_CUSTOMER_FIND(CC.CUST_CD) CUST_CD 
      ,CC.ORD_SEQ
      ,CC.SPEC_ABBSYM
      ,CC.SPEC_STL_GRD
      ,CC.COIL_THK
      ,CC.COIL_WTH
      ,CC.DCS_THK      
      ,CC.DCS_WTH
      ,CC.L2_COIL_WTH
      ,CC.L2_COIL_THK
      ,CC.YUAN_COIL_THK
      ,CC.YUAN_COIL_WTH
      ,CC.ACT_WGT
      ,CC.MISSNO_CLF_CD
      ,CC.SMP_DIR_PIC_YN
      ,CC.SMP_PICK_YN
      ,CC.SMP_NO
      ,CC.SMP_CUT_LOC
      ,CC.WGT_DEC_RST
      ,CC.EXTSHAPE_DEC_GRD
      ,CC.EXTSHAPE_QUALITY
      ,CC.CUR_PROG_CD
      ,CC.CRK_CD1
      ,CC.CRK_CD2
      ,CC.CRK_CD3
      ,CC.CRK_CD4
      ,CC.CRK_CD5
      ,CC.FB_REASON
      ,CC.CRK_CD1_TYPE
      ,CC.CRK_CD2_TYPE
      ,CC.CRK_CD3_TYPE
      ,CC.CRK_CD4_TYPE
      ,CC.CRK_CD5_TYPE
      ,t10.RSEPON_UNIT
       ,t10.DETAINFO
      ,decode(CC.MAOCI,'N','不合格','Y'，'合格') MAOCI
      ,SM.ORD_THK          C_ORD_THK          --订单计划规格
      ,SM.ORD_WTH          C_ORD_WTH          --订单计划规格
      ,SM.THK_MIN          C_ORD_THK_MIN      --订单最小厚度
      ,SM.THK_MAX          C_ORD_THK_MAX      --订单最大厚度
      ,SM.WTH_MIN          C_ORD_WTH_MIN      --订单最小宽度
      ,SM.WTH_MAX          C_ORD_WTH_MAX      --订单最大宽度
      ,CC.MILL_DTIME
      ,CL.MANU_COIL_THK        YUAN_COIL_THK
      ,CL.MANU_COIL_WTH        YUAN_COIL_WTH
      ,SM.COIL_THK             S_COIL_THK
      ,SM.COIL_WTH             S_COIL_WTH
      ,CC.ELONGATION_SPM                      --平整机延伸率
      ,CC.CU_CAO_DU                           --粗糙度
      ,CC.CAL_TYPE_TEMP						  --返修温度
      ,DECODE(CC.CAL_TYPE,'2','Y','')  FAN_XIU	
      ,DECODE(CC.CAL_TYPE,'3','Y','')  RCAL_YN   --是否过渡
      ,CC.RCAL_CNT
      ,DECODE(CC.CAL_TYPE,'2','返修卷','3','过渡卷','正常重卷')  CAL_TYPE
      ,CASE WHEN CC.RCAL_CNT >0 THEN CC.RCAL_CNT||'次过渡'  ELSE NULL END    RCAL_CNT_1
      ,CC.EXTSHAPE_DEC_ID
      ,CC.EXTSHAPE_DEC_DTIME
      ,CC.COIL_RT
      ,CC.FB_YN
      ,CL.H_COIL_NO1
      ,CL.SLAB_NO
      ,CL.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_S,  --酸轧卷外观判定结果
       CL.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_S,  --酸轧卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD1) CRK_CD1_S,   --酸轧卷缺陷1  
       CL.CRK_CD1 CRK_CD1_S, 
       CL.CRK_CD1_TYPE CRK_CD1_TYPE_S,          --酸轧卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CL.CRK_CD2) CRK_CD2_S,   --酸轧卷缺陷2
       CL.CRK_CD2 CRK_CD2_S,
       CL.CRK_CD2_TYPE CRK_CD2_TYPE_S,           --酸轧卷缺陷2类型
       CK.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_H,  --热轧卷外观判定结果
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD1) CRK_CD1_H,  --热轧卷缺陷1  
       (SELECT TC3.SM_CFNM  FROM TBZ00_COMMCD  TC3 WHERE TC3.LG_CD = 'H02001' AND TC3.SM_CD = CK.CRK_CD1) CRK_CD1_H,
       --ZL_NORM_COMM.FZ00_COMM('H02001', CK.CRK_CD2) CRK_CD2_H,   --热轧卷缺陷2
       (SELECT TC4.SM_CFNM  FROM TBZ00_COMMCD  TC4 WHERE TC4.LG_CD = 'H02001' AND TC4.SM_CD = CK.CRK_CD2) CRK_CD2_H,
       CC.EXTSHAPE_DEC_GRD_L,               	--连退卷外观判定结果
       CC.EXTSHAPE_QUALITY_L,               	--连退卷外观判定等级
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD1_L) CRK_CD1_L, --连退卷缺陷1  
       CC.CRK_CD1_L CRK_CD1_L,
       CC.CRK_CD1_TYPE_L,               		--连退卷缺陷1类型
       --ZL_NORM_COMM.FZ00_COMM('B02001',CC.CRK_CD2_L) CRK_CD2_L, --连退卷缺陷2
       CC.CRK_CD2_L CRK_CD2_L,
       CC.CRK_CD2_TYPE_L                    	--连退卷缺陷2类型
       FROM     L_TBF03_SPEC_MILL          SM  
               ,C_TBL02_COIL_COMM	       CL
               ,C_TBK02_COIL_COMM          CK 
               ,JB_RSEPON_UNIT			t10
       		   ,(SELECT       T1.COIL_NO         COIL_ID 
       		                 ,T1.ORI_OLD_SAMPL_NO     SUAN_COIL_NO
       		                 ,T1.EXTSHAPE_DEC_GRD EXTSHAPE_DEC_GRD_L,   --外观判定结果
				               T1.EXTSHAPE_QUALITY EXTSHAPE_QUALITY_L,  --外观判定等级
				               T1.CRK_CD1 CRK_CD1_L,                    --缺陷1  
				               T1.CRK_CD1_TYPE CRK_CD1_TYPE_L,          --缺陷1类型
				               T1.CRK_CD2 CRK_CD2_L,                    --缺陷2
				              T1.CRK_CD2_TYPE CRK_CD2_TYPE_L            --缺陷2类型
		                     ,T2.*   
		         FROM         C_TBC02_COIL_COMM                  T1
		                     ,C_TBC02_COIL_COMM                  T2
		         WHERE        T1.SLAB_NO                         =      T2.SLAB_NO     
		         AND          T1.LINE_TP                         =      'L'
		         AND          T2.LINE_TP                         =      'C'
		         AND          LENGTH(T1.COIL_NO)                 =      12
		         --AND          T2.MILL_DTIME     BETWEEN     NVL(? , T2.MILL_DTIME)   AND  NVL(? , T2.MILL_DTIME)
       			 AND          T2.OLD_SAMPL_NO   LIKE   ?||'%'
				 )   CC
       WHERE           CC.COIL_ID                  =     SM.L_COIL_ID
       AND             CC.LINE_TP                  =     'C'
       AND             CC.DIVIDE_YN                =     'N'  
       AND			   CL.H_COIL_NO1 			   =     CK.COIL_NO(+)
       --AND             CL.COIL_NO        	       =     SUBSTR(CC.OLD_SAMPL_NO , 1,12)
       and 				CC.OLD_SAMPL_NO = t10.OLD_SAMPL_NO(+)
       AND             CL.COIL_NO                  =     SM.C_COIL_NO
       --AND             CC.MILL_DTIME     BETWEEN     NVL(? , CC.MILL_DTIME)   AND  NVL(? , CC.MILL_DTIME)
       --AND             CC.OLD_SAMPL_NO   LIKE   ?||'%'
       ORDER BY        CC.OLD_SAMPL_NO
</query>
<query id="UIB030110_01.CALL"  desc="酸轧、连退、重卷操作">
	{call ZL_LIANT_DCS01.SAVE_COIL_SMPNO(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
</query>

</queryMap>